SP2B Automatic Shower Booster Pump

Description

The SP2B is our most popular pump because for most homes trying to achieve a perfect shower, they only need to boost the hot and the cold will look after itself.

The SP2B works with all plumbing systems including combi, gravity, electric, unvented.

The SP2B is a WRAS-approved automatic booster pump small enough to sit inline and unsupported, on a 22mm or 15mm pipe, with a brass body and a quiet 12-volt motor. It detects flow the moment you open a tap and starts by itself — no switches, no wiring into the mains. Fit it on the main feed and it lifts every outlet in the house; fit it on one shower’s pipe and it boosts just that shower. Have multiple showers or taps with poor flow? Simply add one SP2B per outlet.

DIY install in 3 easy steps
Simplest way to boost showers & taps
Completely automatic operation
No Cylinder Shower Pump Flange – Works at Any Angle
Safe 12V DC – no electrician needed!
Unique patented & award-winning design
WRAS Approved & British designed & made

Applications include:

Electric showers
Gravity-fed hot & cold water systems
Mixed gravity/mains systems
Combi boilers and unvented systems

A Shower Power Booster is available as a single pump or in bundles of two pumps.

A ShowerPowerBooster will boost any and all systems but it is particularly useful in boosting gravity and mixed gravity systems where existing pressures are low. It will not impeded flow should there be a power cut.

The SP2B is a fully automatic pump and a single pump will be effective for most applications but we recommend that you buy a SP21S double boost or a SP22S for boosting hot and cold for some applications (click on links below).

Gravity Hot & Cold Systems

Gravity Hot & Mains Cold Systems

Negative Head Systems

Boosting Kitchen Taps

Single, Double, & Triple Boosts

Fitting Pumps in Lofts

Boosting Showers & Taps in Hotels

Detailed drawings and instructions are in the booklet sent with the pumps but you can download the online version of this guide from our website

Product	Brand	Shower Power Booster
Product	Manufacturer	Flowflex Components LTD
General	3 Year Warranty (2 years without SPB Ultimate Care Pack)
	30 Day Return Policy
	WRAS Approval - 2002802
Features	Pump Type	Centrifugal with Brushless Motor
	Inlet Filter	✔
	Dry run protection	✔
	Waterproof	✔
Materials	Body	Brass - BS6282-5
Materials	Pump	Plastic
Physical	Length	150mm
	Width	45mm
	Height	125mm
	Weight	625g
	Pump Connection	22mm or 15mm Compression
	Maximum Head	5.2m to 6m
Performance	Typical Output	5 L/Min @ 3.2m
	Max Sustained Pressure	4 Bars
	Max Sustained Temperature	65 - 85°C
	Min Flow Rate	1.5 L/Min
	Max Flow Rate	9 L/Min
	Transformer	12 Volt (1.5 amp or 3.0 amp)
Electrical	Input	100 - 240 Volts 50/60Hz
	Output	12 Volts DC
	Power Consumption	12.6 Watts @ 5 L/Min
	Fuse Rating	3 Amp
	Power Cable	3 Pin Plug with 1m AC Cable Male DC Plug with 1m DC Cable

Contained in the SP2B Box:

1 x Fitting Guide & instructions
1 x Fitting attachments for 22mm or 15mm diameter pipe
1 x Power supply 3.0 amp
1 x Shower Power Booster automatic water pump

Why a good shower head is so important in getting a great shower

The science of and what you need for a good shower

The reasons for and the science that makes for a good shower

High temperature ratings allow pumping to and from wood burners

We design our pumps to withstand 20 times the pressure in normal homes just because we can!

SP2B: Automatic Shower Power Booster Pump

Popular Extras

Description